Bugatti Lighter issues

Adcurium

Does anyone else with this lighter have problems with it? I got it last year with the Camacho DD and it worked for about a week. And it's been crap since then. It always lets me down.

wwhwang

What's the problem with the lighter? Is the fuel not coming through, is it not sparking, is the punch cutter on it dull as a spoon? If the fuel's not coming out, but it's sparking, try taking a can of compressed air and blowing down the tubes since it's probably a clog from the impurities in the fuel. If it's not sparking, then it's a malfunctioning ignition system and you need to get it repaired. If your punch is dull...well, guilloutines are better.

Adcurium

Well, it sparks but the flame immediately goes out. But it sounds like I could still hear the fuel hissing out. I'm baffled!

kuzi16

you need to purge the lighter completely then use a fuel that is triple refined or better. the cheap stuff just wont work.

Duder2

What Kuzi said and/or adjust the flame. If it's too low it won't stay lit.

Lasabar

Redtailhawkoz

I use Mine every Day all the time, What Kuzi Said, I use Vector Fuel or Colibri, or Xikar its woorth the extra cash for good fuel.... Also I find Blowing out the Flame thrower every once in a while makes it Blast great adjust the flame or it east fuel. Mine works great never had a problem once i tweeked it and EVRYONE who sees it or Uses it wants it! Its a MANS Lighter!

docbp87

Redtailhawkoz

docbp87

Krieg

I had the same problem with my Bugatti. Took forever to purge, but once I did I turned the valve all the way down and filled it up, Works perfectly now.

Hawk55

You have got to be kidding... This is actually a $20 lighter?

Redtailhawkoz

Andrew Dzikoski

Have you been using Ronson butane? I know this stuff seems to cause a lot of issues with torches lighters but it sound like you just need to play with the flame adjustment. Also where are you located? if you are at a high altitude it could be the lower oxygen content. And Yes Vector did copy the B1 if you look at the night its a dead ringer except the Vector uses philips head screws and the B1 uses allen screws. It is made at 2 different places by 2 different companies.

docbp87

Andrew Dzikoski:

Have you been using Ronson butane? I know this stuff seems to cause a lot of issues with torches lighters but it sound like you just need to play with the flame adjustment. Also where are you located? if you are at a high altitude it could be the lower oxygen content. And Yes Vector did copy the B1 if you look at the night its a dead ringer except the Vector uses philips head screws and the B1 uses allen screws. It is made at 2 different places by 2 different companies.

Interesting. I read otherwise on another forum, but looking at my lighter, and looking at the photo, it seems probable that you are indeed correct. Good call.

kuzi16

ive seen this vector in person. like others have said, it does not have the same feel.