anyone a handy man?

phobicsquirrel

I haven't done a search for this on the web or anything but I figured I'd ask here. I have a new dishwasher that was installed before I bought my house. The thing is awesome but sometimes there's a pool of water that is on the floor. Anyone know what I should look for? I have no idea about this stuff.

Vision

Mine has a Hot Water Feed and a Drain Return. Ive seen them leak from the ends that connect ON the DW its self. Usually its cross-threaded or the pipe tape wasnt applied correctly or at all. I would pull it out and re-pipe tape it and make sure its connected. Some older lines are cheap plastic like flex tubes and can be replaced with better rubber ones.

phobicsquirrel

That makes sense, I'll check that. Thanks! (I would imagine you may be right, as I went ahead and put all new, very nice shower heads in and the previous owners weren't all that handy).

pross

Make sure she is not standing too far away from the sink....Oh wait, wrong type of dishwasher?

JDH

phobicsquirrel:

That makes sense, I'll check that. Thanks! (I would imagine you may be right, as I went ahead and put all new, very nice shower heads in and the previous owners weren't all that handy).

Whatever it is (probably the connection as described), it should be delt with asap. Leaky dishwashers are notorious for attracting termites.

jgibv

danielzreyes

Double check the seal on the door.

phobicsquirrel

thanks so much, you all rock.

The Kid

do you have a garbage disposal?

ddubridge

pross:

Make sure she is not standing too far away from the sink....Oh wait, wrong type of dishwasher?

lol

Amos Umwhat

The Kid:

do you have a garbage disposal?

Good question. I thought my dishwasher was leaking, it was actually the fitting at the U below the sink, the outlet from the DW draining in above it. A little tightening and voila! No more leak.

JDH

Amos Umwhat:

The Kid:

do you have a garbage disposal?

Good question. I thought my dishwasher was leaking, it was actually the fitting at the U below the sink, the outlet from the DW draining in above it. A little tightening and voila! No more leak.

I really hate plumbing - of all the DIY stuff, plumbing is my least favorite.

macs-smokes

Plumbing projects are classified by how many trips BACK to the supply store to get the right parts. 1, 2, 3, etc. I hate plumbing.

beatnic

All I know is that plumbing problems always end up with me working upside down, on my back, getting wet and using foul language. Call a pro.

Ken Light

pross:

Make sure she is not standing too far away from the sink....Oh wait, wrong type of dishwasher?

LoL I was gonna say let her have bathroom breaks...

JDH

macs-smokes:

Plumbing projects are classified by how many trips BACK to the supply store to get the right parts. 1, 2, 3, etc. I hate plumbing.

Aint it the truth! Don't know how many times I've had to go back for the RIGHT valve stem instead of the one I just bought, or when I spent my 40th birthday installing a new toilet (I was born on Halloween) in the guest bathroom, or when I was crawling around in the crawl space, and gave myself a black eye by whacking it into a cast iron pipe. That was a real "three stooges" moment..I really hate plumbing.

macs-smokes

I can build you anything you want... just don't ask you to plumb it... if water flows through it I want nothing to do with it. Machine it = Check. Build it = check ... plumb it.. kiiss my bootie

macs-smokes

I can build you anything you want... just don't ask you to plumb it... if water flows through it I want nothing to do with it. Machine it = Check. Build it = check ... plumb it.. kiiss my butt

MVW67

pross:

Make sure she is not standing too far away from the sink....Oh wait, wrong type of dishwasher?

Why do women have small feet?? To stand closer to the sink!! LOL

twistedstem

MVW67:

pross:

Make sure she is not standing too far away from the sink....Oh wait, wrong type of dishwasher?

Why do women have small feet?? To stand closer to the sink!! LOL

i was laughin when i read this..then my wife walked in the room.....

Dark Roast

I have a kitchen faucet that has been getting looser and looser. I know what it will take to fix it, I just don't feel like performing contortionist movements while laying on my back! I did that while I was in my 20's, that was many many years ago. F PLUMBING! no wonder plumbers make so much money! God Bless them.

phobicsquirrel

so I figured this out. Seems as though LG have a fancy sort of drying system in their machines. Yup, there is a plunging device that is suppose to generate heat from under the panel door (in the front). there is a plastic vent that attaches to the fan/plunger unit. Well that was defective, but the one I have had the new plastic vent. However for some reason when I took it all apart and put it back the water puddles stopped. Seems as though before the condensation would collect and then drip on the floor (as the plastic vent ends at the bottom of the door). I think I may have to buy a new plunger unit though but it seems to be working now.

macs-smokes

Good to hear you found the problem... Here in Ta-Town we have a crappy little place (see hard to get to before they close) that is amazing when it comes to getting the right part... walk in with a model and problem... walk out with right part. EVERY TIME! I have fixed every appliance in the house up to and including the A/C Heater... and it is typically cheaper than ordering parts of net. Had to just visit them last week due to a child deciding to use the plastic drawer in fridge as a step stool to get into top of freezer. Online $15-30. Washer Specialist (the hole in the wall) $6.76 tax included. Great place to know... I would suspect there is a place like that in your neck of the woods.

phobicsquirrel

Sadly the thing I have learned is that getting parts sucks around me. All of the stores are in portland and close around 5 or at the latest 6. And they usually are mon-through friday. which is retarded. and they don't have a good website to see their inventory. It's almost impossible for me to get to them before they close. So I have to go online. I hate how all the shops have pretty much gone away.

macs-smokes

Agreed... Working the weekends like I have for the last 2 years it made it easier... but moving back to first shift next month. Which will make it harder for me, but knowing that they close at 4, I just take off hour early to get there. Sucks but you do what you will to pay the bill.

Dark Roast

phobicsquirrel:

Sadly the thing I have learned is that getting parts sucks around me. All of the stores are in portland and close around 5 or at the latest 6. And they usually are mon-through friday. which is retarded. and they don't have a good website to see their inventory. It's almost impossible for me to get to them before they close. So I have to go online. I hate how all the shops have pretty much gone away.

Most of the mom and pop shops have been put out of business by the big box stores. Try to locate an Ace Hardware nearby where you live. I find they are independently owned, open on weekends and will really go out of their way to help you. Good Luck